Request Quote

BA100

Dielectric Oil Tester

With a maximum output of 100kV, the BA100 is suitable for testing all types of insulation oils and in all types of laboratory environments. Like the BA75, the BA100 comes complete with an integrated printer and bright color LCD that graphical displays the actual voltage breakdown of each test.

Automated testing of small or large volumes of oil using the wireless controlled interface and the supplied BA Control Center software allows the user to run several samples and record test results simultaneously on multiple instruments from just one base station PC running the Control Center software. This feature allows the user to run several test samples and record test results simultaneously on multiple instruments from just one base station PC running the Control Center software.

A backup integrated battery also allows this unit to work in a mobile environment, when shore power is either interrupted or not available. The instrument comes complete with pre-installed, fully automatic test sequences and is also user programmable to meet any customer unique testing requirements.

All instruments come complete with integrated battery, printer, carry handle, USB memory stick, Mains cable, Calibration sheet, Operation manual, BA Control Center software, and extra paper roll for printer.

Note: Various Test cells are available – see optional items.

Features:

  • Output voltage: 0-100kVrms
  • Easy to use, intuitive, menu driven display
  • Ultra bright, color LCD
  • Weighs only 32kg/71lbs (incl. Battery)
  • Scope display of voltage breakdown
  • Direct, precise voltage and current measurement
  • Ultrafast, low energy switch-off ( < 5 µs)
  • Viewable, screened HV test chamber
  • Automatic PDF generation of results
  • Compatible with mineral, silicon, and ester based oils
  • Fully automatic standards / sequences
  • User-programmable test sequences.
  • No nuisance error messages
  • Adjustable gap spacing mechanism on optional test cells.
  • Integrated printer & temperature measurement
  • Moisture impervious test cell construction
  • Low volume test cell available where applicable.
  • EMC shielding
  • Multiple safety interlocks
  • ATA approved transport / cases and test cells available – see options.

Standard Accessories

  • Integrated Battery
  • Integrated Printer
  • Carrying Handle
  • USB Flash Drive / Memory Stick
  • AC Mains Cable
  • Extra Paper Roll
  • Operational Manual
  • Calibration Certificate
  • Bluetooth Communication Module
  • BA Control Center Software

Optional Items

  • 801 002 - ASTM877 Test Cell complete with lid & 2.54mm/0.1" spacer gauge (0.4L)
  • 801 003 - ASTM877 Reduced Volume Test Cell with 2.54mm/0.1" spacer gauge (0.1L)
  • 801 004 - ASTM1816 Test Cell complete with integrated stirrer lid and 1mm/2mm spacer gauges (0.4L)
  • 801 008 - IEC 60 Fig I Test Cell complete with lid, magnetic stirrer, lifting stick & 2.5mm spacer gauge (0.4L)
  • 801 009 - IEC 60 Fig II Test Cell complete with lid, magnetic stirrer, lifting stick & 2.5mm spacer gauge (0.4L)

Technical Specifications

Ordering Information
801 001
Communication Interface
USB Memory stick, Bluetooth®
Temperature Resolution
1°C (1.8°F)
Display
2.8
Preprogrammed Test Standards:
ASTM 1816-04-1
ASTM 1816-04-2
ASTM 877-02A
ASTM 977-02B
ÖVE EN 60156
BS EN 60156
NF EN 60156
UNE EN 60156
SABS EN 60156
PA SEV EN 60156
NEN 101 56
IEC 60156 / 95
VDE 370-5 / 96
AS 1767:2:1
Single measurement
Other standards possible
Customer Specific User Programmable Stds
Almost Unlimited
PC Software Control Center
Included
Power Supply / Input
85 V – 264 V (47 Hz – 63 Hz) and 12V DC external power supply
Power Supply Consumption
1x12V / 7.2Ah
Output Voltage

0-100kV rms
Voltage Measurement Accuracy

±1 kV over full range
Voltage Resolution Displayed

0.1kV
Voltage Rate of Rise / Slew Rate

0.5 – 10 kV/s
Trip Time On Discharge Detection

< 5 µs
Temperature Measurement Range
32°F – 212°F
0°C – 100°C
Printer

Dot Matrix Ink Printer
Printer Paper

1.75 in / 44.5mm
Environmental:

Operating
23°F to 113°F (-5°C to +45°C)
Storage
-4°F to 140°F (-20°C to +60°C)
Relative Humidity (operating)
< 90%, non-condensing
Dimensions:

Imperial
20.5 x 13.5 x 11.8 in
Metric
521 x 343 x 300 mm
Weight
71 lbs / 49 kg

Note: Due to continuous development, the information may change without notice.

VLF / DC
Tan Delta
TD
Partial Discharge
PD
Oil
Testing
Cable
ID
Fault
Location